Cart 0
Conduit 90-Degree Sweep Joint | Cantex
Using a Conduit Sweep Joint to transition from below to above ground.

Conduit 90° Sweep Joint (Bell End)

Shipping calculated at checkout.

Conduit fittings are used to provide exposed irrigation wire protection from the elements. In regards to irrigation, low voltage wire is run from electric valves to irrigation clocks. Although most of the wire is buried underground, the portion that connects to the clock is above ground.

Conduit 90° Sweep Elbows are made from Schedule 40 PVC conduit pipe. The sweeping turn allows the wire to smoothly change direction without kinking. While the bell end acts as a coupling and easily connects electrical pipe together.

Manufacturer Part Number:
1/2" Sweep Joint (Bell End) : R5233823
3/4" Sweep Joint (Bell End) : R5233824
1" Sweep Joint (Bell End) : R5233825

Made by: Cantex